@article { author = {Taheriyoun, Masoud and Memaripour, Alireza and Torabian, Ali}, title = {Statistical Modeling and Process Optimization of Industrial Wastewater Treatment of Mobarekeh Steel Complex Using Response Surface Methodology}, journal = {Water Reuse}, volume = {2}, number = {2}, pages = {159-171}, year = {2015}, publisher = {}, issn = {2423-3455}, eissn = {2423-3463}, doi = {}, abstract = {In this study, modeling and optimization of coagulation and flocculation processes in COD removal of galvanized wastewater treatment plant of Mobarakeh Steel Complex (MSC) were studied. Experiments of this study were designed using response surface method which is one of the most efficient methods in experimental design. The variables assessed in this study, are four factors including pH, input turbidity, coagulant and coagulant aid concentrations that each of them has been studied in five levels. In the modeling stage, by developing a second order regression model, predicting COD percentage removal at different values of assessed variables becomes possible without experiment. In the optimization phase, the optimal values of variables, with the goal of maximizing COD removal and minimizing material consumption, indicates the use of 350 mg/L ferric chloride as coagulant, 0.14 mg/L polyelectrolyte as coagulant aid in pH of 11 and input turbidity of 79 NTU.Keywords: coagulation-flocculation, COD, optimization, galvanized wastewater, response surface}, keywords = {Coagulation-flocculation,COD,Optimization,Galvanized Wastewater,Response surface}, title_fa = {مدل سازی آماری و بهینه سازی فرایند تصفیة فاضلاب صنعتی مجتمع فولاد مبارکه به روش سطح پاسخ}, abstract_fa = {در تحقیق حاضر، فرایند انعقاد و لخته سازی فاضلاب تصفیه خانة گالوانیزة مجتمع فولاد مبارکه به منظور حذف سی او دی از فاضلاب این واحد مدلسازی و بهینه سازی می شود. آزمایش های طراحی شده در این تحقیق با استفاده از مدل سطح پاسخ صورت گرفته است که از کارآمدترین روش های طراحی آزمایش است. متغیرهای مورد بررسی در این تحقیق چهار عامل پی اچ، کدورت ورودی، غلظت منعقدکننده و غلظت کمک منعقدکننده است که هریک در پنج سطح بررسی شده است. در مرحلة مدل سازی، با ساخت مدل رگرسیونی مرتبة دوم امکان پیشبینی میزان درصد حذف سی او دی در مقادیر مختلف متغیرهای مورد بررسی، بدون انجام دادن آزمایش فراهم می شود. در مرحلة بهینه سازی نیز مقدار بهینة متغیرهای مورد بررسی با هدف حداکثرکردن میزان حذف سی او دی و حداقل کردن میزان مواد مصرفی به دست آمد که بیانگر مصرف 350 میلی گرم بر لیتر کلرورفریک به عنوان منعقدکننده، 0/14 میلی گرم بر لیتر پلی الکترولیت به عنوان کمک منعقدکننده در پی اچ برابر 11 و کدورت ورودی 79 ان تی یو است.}, keywords_fa = {انعقاد و لخته سازی,بهینه سازی,سطح پاسخ,سی او دی,فاضلاب گالوانیزه}, url = {https://wrj.ut.ac.ir/article_58555.html}, eprint = {https://wrj.ut.ac.ir/article_58555_7e49f395166388ceff79c416b32986b5.pdf} }